General Features
Richco provides the most comprehensive range of wire, cable, and hose management products in both plastic and metal materials. They include many types and styles for all of your routing needs. Products are available with both fixed and adjustable holding diameters. Plastic clips, clamps, wire saddles, and kurly lok designs in addition to innovative products such as Cableater (SHR) and Raceway, are available. These parts have a wide variety of mounting methods including self-adhesive tape, user-applied adhesives, screws, rivets, blind hole, and push through arrowhead designs.

Applications
Appliance Industry; including dishwashers washers and dryers, refrigerators, and food preparation equipment Automotive Industry; including heat-stabilized material (by special order) for under the hood applications Electronics Industry; including computer, copy machines, TV and associated products Boating and RV Industries

Special Products
Richco maintains the largest selection of clips, clamps, and wire routing products in the industry to assist you with your cabling needs. Many of Richco's parts have interchangeable locking devices, which may not appear as standard on every part. Richco would ask that you please contact their engineering department should you require a part which is different than their standard product offerings.

Special Options
Materials Most plastic clips and clamps are manufactured in Nylon 6/6, RMS-01 as a standard. Most parts which end in the 01 suffix can be ordered in special materials. Material Flammability Rating Application Nylon 6/6 V-2 General Purpose Flame Retardant Nylon V-0 General Purpose Nylon 4/6 V-2 High Temperature Impact Modified Nylon HB Shear Force Black Ultraviolet UVB Outdoor Applications
Special Packaging Most Richco parts come "standard packed" 1,000 pieces per bag. Wire routing, clips, and clamps can be specially packaged in any quantity as a special order. Minimum order requirements may apply to special material. Please consult the factory to discuss application.

Reminders
Proper Application Procedures for RMS-15 and RMS-34 Maximum recommended static loading at the adhesive surface is 1/4 pound per square inch of tape. Remove dirt, wax, dust, soap, or oil from contact surface. Apply to relatively flat surface on glass, metal, wood, tile, plastic, etc. Do not use on fabric, coarse concrete, loose paint, or rough wallpaper. Do not touch adhesive. Remove liner. Place article in desired position and press firmly to insure good adhesive contact. Do not attempt to reposition article. If possible, allow overnight dwell before loading.